Hand Made Christmas Card with Oval Shaker Dome

Hi Everyone, here’s a third card made using one of our new range of shaker domes. This time I have used the oval dome, we did already stock an oval shaker dome but this one is smaller and shallower so can be used to make a smaller card. I decided to make a Christmas card with a classic red, green and gold color scheme with the greeting stamped inside the shaker dome.

I used a cream A6 blank card for the base, to coordinate with the small cream colored stripe in the tartan paper. I cut a piece of plain green card and a piece of the tartan paper both the same size approximately 14 x 10cm. I used an oval cutting die that matches the size of the shaker dome to cut an oval shape out of the tartan paper. I laid the tartan paper over the green card to create a guide as to where I should stamp the greeting to make sure that it is in the centre of the oval shape. I stamped the greeting in Watermark ink and heat embossed it with gold embossing powder.

To make sure that the shaker dome is in the correct position I put the die cut tartan paper over it and positioned it on the card, then carefully lifted the paper off and used a pencil to mark where the shaker dome should be. I poured a pile of the Soft Snowdrift chunky glitter on top of the stamped greeting, glued around the rim of the shaker dome and fixed it to the green card using the marks that I had made.

Once the glue on the shaker dome was dry I used double sided tape to fix the tartan paper over the shaker dome. I used the same size oval die along with the one a size bigger to die cut a frame from matt gold card and glued this over the shaker dome.

To make the poinsettia I used a die cutter to cut petals from red and green card, layered them up and glued them together and used self adhesive gold metal gems in the centre. I colored a page from an old book with Pine Needles distress ink, then die cut two holly branches from it. The poinsettia is fixed using a 3mm adhesive foam pad so that it can spread over the shaker dome and the holly branches are glued in position underneath the poinsettia.

I like the traditional color scheme for this card and you can’t beat a bit of tartan for a Christmas card! I hope you like it too, please leave a comment to let me know what you think.
Debbie x

Materials used:

• Cream A6 blank card and envelope
• Green, red and gold card
• Jingle All The Way 12 x 12 paper pad
• Oval Frames die cutting set
• Shallow Oval shaker dome
• Soft Snowdrift Chunky glitter
• Christmas Words clear stamp set (Discontinued)
• Watermark ink pad
• Gold embossing powder
• Folding heat gun
• Poinsettia die cutting set
• Holly Branch die cutting set
• Pine Needles distress ink pad
• Self Adhesive Metal Gems gold
• 3mm adhesive foam pads
• Double sided tape runner